Calitek offers a revolutionary and innovative horticultural lighting system : the DE 600-1150W. The ballast, the reflector and the bulb are combined in one and the same module for an optimization of the material quality and an incomparable ease of installation.
Pro 600-1150W by Calitek
Calitek offers a revolutionary and innovative horticultural lighting system !
The ballast, the reflector and the bulb are combined in one and the same module for an optimization of the material quality and an incomparable ease of installation.
The horticultural lighting system CALITEK CK-1000 is a software-based digital control unit that has been designed to give growers the most selective versatility and lighting performance for plants.
This design can run a lamp at rated power and is composed of a four-phase controller to adjust the ballast output to 600W, 750W or 1150W or Super Par , which will increase the brightness by 15%. Be sure to run your lamp continuously at 100% for 10 minutes before switching to other settings. Fast switching of the parameters can affect the lamp.
SMART START ™ IGNITION CONTROL
This revolutionary feature, unique to our products, makes the CALITEK digital ballast the safest and most reliable ballast when used in multi-lamp automated applications. When multiple units are connected to the same AC circuit, our integrated ignition control software will fully balance the electrical draw by lighting one lamp at a time to avoid electrical surges and spikes that can overload the AC power and breakout systems. trip circuit. For increased efficiency, this feature is enabled alongside our Soft Start Technology.
SOFT START TECHNOLOGY
Soft Start technology extends the life of the lamp by stopping the current flow to the lamp and preventing overloading of the lamp. When the ballast starts cold, there will be a delay of 3 seconds before ignition. After ignition, there will be a series of random delays of 0-2 seconds before the total brightness is reached after about 3 to 5 minutes. SoftStart technology is also activated when you increase and decrease the power of the lamp using the Smart-Step function.
COMPATIBILITY OF THE LAMP
The CALITEK digital ballast is suitable for use with all Double Ended High Pressure Sodium ( HPS ), and Double Ended Metal Halide ( MH ) lamps of good quality. For a guaranteed perfect combination and the best results, we recommend the horticultural lamps CALITEK. CALITEK lamps are optimized for use with high efficiency electronic ballasts with adjustable output.
The CALITEK case design acts as a superior heat sink, making the ballast extremely cool while running without the need for internal fans.
COMPLETE CIRCUIT PROTECTION
The CALITEK digital ballast uses a sophisticated system- controlled circuit control system that is not seen in other manufacturers’ ballasts. The system protects against a series of faults, including: open circuit protection, short circuit protection, overvoltage protection, live protection and overheating protection. On ignition, the ballast performs a 3 second circuit test and, in the event of a fault, the ballast will enter protection mode to prevent ballast and lamp damage.
HIGH ENERGY EFFICIENCY
CALITEK digital ballast is up to 30% more efficient than standard magnetic ballast, producing more lumens of light per watt of power consumed. Efficiency does not decrease and is maintained throughout the life of the unit.
The CALITEK digital ballast has no noisy internal fans and is completely silent in operation.
Lamp: 1000W OF HPS / MH
Input power: 1000W
Input voltage: 240V, 50 / 60Hz
Input Intensity: 4.4 A / 240V
Intensity of call: 60 A / 220Vac
Maximum output power: 1150W
Leakage current: 0.5mA max at 180-300Vac
THD: <10%, 60Hz
Power factor:> 0.99 (> 0.99 max,> 0.95)
Input voltage range: 100-265Vac
Ambient temperature: -45 ° C to 80 ° C
Unit weight: 6.4Kg
Unit size: 64.4 x 37.3 x 10.5 cm
Bulb failure detection: YES
Ignition time: 3-10 seconds
Input frequency: 47/63 Hz
Protections: Open Circuit / Short Circuit / Overvoltage / Undervoltage / Overheating
Insulation voltage: Input / Gnd 1600Vac – 5mA 1Min
Insulation Resistance: Input / Gnd 50M? – 500Vdc 1Min
Dimmer: 600/750/1000 / SUPER PAR
Open circuit voltage: <300v br=””> Ignition voltage: 3-5 KV
Output frequency:> 100 KHz
Lamp power: CONSTANT
RF interference: NO
Operating temperature: 0 ° C to + 30 ° C
Storage temperature: -45 ° C to + 80 ° C
Operating humidity: 20 to 95%
Storage humidity: 10 to 95%
IP environment: IP20
There are no reviews yet.